声明：本文转载自https://my.oschina.net/gaoenwei/blog/1623214，转载目的在于传递更多信息，仅供学习交流之用。如有侵权行为，请联系我，我会及时删除。
要在单台机器上搭建Redis集群，方式是通过不同的TCP端口启动多个实例，然后组成集群，同时记录在搭建过程中踩过的坑。
centos版本：6.7
redis版本：3.2.3
安装方式：源码安装
服务器：1台
此处默认已安装好单台redis，如果不会可以参照《centos上安装redis》
我们在Redis安装目录下创建目录cluster，并编写7000.conf~7005.conf 6个配置文件，这6个配置文件用来启动6个实例，后面将使用这6个实例组成集群。
以7000.conf为例，配置文件需要填写如下几项：
port 7000 //端口7000,7001,7002,7003,7004,7005 bind 192.168.186.91 //默认ip为127.0.0.1 需要改为其他节点机器可访问的ip 否则创建集群时无法访问对应的端口，无法创建集群 daemonize yes //redis后台运行 pidfile ./redis_7000.pid //pidfile文件对应7000,7001,7002,7003,7004,7005 cluster-enabled yes //开启集群 把注释#去掉 cluster-config-file nodes_7000.conf //集群的配置 配置文件首次启动自动生成 7000,7001,7002,7003,7004,7005 cluster-node-timeout 15000 //请求超时 默认15秒，可自行设置 appendonly yes //aof日志开启 有需要就开启，它会每次写操作都记录一条日志 分别启动6个实例
./bin/redis-server cluster/conf/7000.conf ./bin/redis-server cluster/conf/7001.conf ./bin/redis-server cluster/conf/7002.conf ./bin/redis-server cluster/conf/7003.conf ./bin/redis-server cluster/conf/7004.conf ./bin/redis-server cluster/conf/7005.conf 启动成功后，看一下进程
# ps -ef | grep redis | grep cluster idata 15711 22329 0 18:40 pts/10 00:00:00 ./bin/redis-server 10.93.84.53:7000 [cluster] idata 15740 22329 0 18:40 pts/10 00:00:00 ./bin/redis-server 10.93.84.53:7001 [cluster] idata 15810 22329 0 18:40 pts/10 00:00:00 ./bin/redis-server 10.93.84.53:7002 [cluster] idata 17023 22329 0 18:42 pts/10 00:00:00 ./bin/redis-server 10.93.84.53:7003 [cluster] idata 17030 22329 0 18:42 pts/10 00:00:00 ./bin/redis-server 10.93.84.53:7004 [cluster] idata 17035 22329 0 18:42 pts/10 00:00:00 ./bin/redis-server 10.93.84.53:7005 [cluster]至此，ip=192.168.186.91机器上创建了6个实例，端口号为port=7000~7005。
1）yum安装ruby和依赖的包。
[root@itfirst redis_cluster]# yum -y install ruby ruby-devel rubygems rpm-build 已加载插件：fastestmirror 设置安装进程 Loading mirror speeds from cached hostfile * base: mirrors.cn99.com * extras: mirrors.cn99.com * updates: mirrors.cn99.com base | 3.7 kB 00:00 extras | 3.4 kB 00:00 mysql-connectors-community | 2.5 kB 00:00 mysql-tools-community | 2.5 kB 00:00 mysql56-community | 2.5 kB 00:00 updates | 3.4 kB 00:00 解决依赖关系 --> 执行事务检查 ---> Package rpm-build.x86_64 0:4.8.0-55.el6 will be 安装 --> 处理依赖关系 patch >= 2.5，它被软件包 rpm-build-4.8.0-55.el6.x86_64 需要 --> 处理依赖关系 elfutils >= 0.128，它被软件包 rpm-build-4.8.0-55.el6.x86_64 需要 --> 处理依赖关系 xz，它被软件包 rpm-build-4.8.0-55.el6.x86_64 需要 --> 处理依赖关系 system-rpm-config，它被软件包 rpm-build-4.8.0-55.el6.x86_64 需要 --> 处理依赖关系 lzma，它被软件包 rpm-build-4.8.0-55.el6.x86_64 需要 --> 处理依赖关系 /usr/bin/gdb-add-index，它被软件包 rpm-build-4.8.0-55.el6.x86_64 需要 ---> Package ruby.x86_64 0:1.8.7.374-5.el6 will be 安装 --> 处理依赖关系 ruby-libs = 1.8.7.374-5.el6，它被软件包 ruby-1.8.7.374-5.el6.x86_64 需要 --> 处理依赖关系 libruby.so.1.8()(64bit)，它被软件包 ruby-1.8.7.374-5.el6.x86_64 需要 ---> Package ruby-devel.x86_64 0:1.8.7.374-5.el6 will be 安装 ---> Package rubygems.noarch 0:1.3.7-5.el6 will be 安装 --> 处理依赖关系 ruby-rdoc，它被软件包 rubygems-1.3.7-5.el6.noarch 需要 --> 执行事务检查 ---> Package elfutils.x86_64 0:0.164-2.el6 will be 安装 --> 处理依赖关系 elfutils-libs(x86-64) = 0.164-2.el6，它被软件包 elfutils-0.164-2.el6.x86_64 需要 --> 处理依赖关系 libdw.so.1(ELFUTILS_0.158)(64bit)，它被软件包 elfutils-0.164-2.el6.x86_64 需要 --> 处理依赖关系 libdw.so.1(ELFUTILS_0.149)(64bit)，它被软件包 elfutils-0.164-2.el6.x86_64 需要 --> 处理依赖关系 libdw.so.1(ELFUTILS_0.148)(64bit)，它被软件包 elfutils-0.164-2.el6.x86_64 需要 --> 处理依赖关系 libdw.so.1(ELFUTILS_0.138)(64bit)，它被软件包 elfutils-0.164-2.el6.x86_64 需要 --> 处理依赖关系 libdw.so.1(ELFUTILS_0.130)(64bit)，它被软件包 elfutils-0.164-2.el6.x86_64 需要 --> 处理依赖关系 libdw.so.1(ELFUTILS_0.127)(64bit)，它被软件包 elfutils-0.164-2.el6.x86_64 需要 --> 处理依赖关系 libdw.so.1(ELFUTILS_0.126)(64bit)，它被软件包 elfutils-0.164-2.el6.x86_64 需要 --> 处理依赖关系 libdw.so.1(ELFUTILS_0.122)(64bit)，它被软件包 elfutils-0.164-2.el6.x86_64 需要 --> 处理依赖关系 libasm.so.1(ELFUTILS_1.0)(64bit)，它被软件包 elfutils-0.164-2.el6.x86_64 需要 --> 处理依赖关系 libdw.so.1()(64bit)，它被软件包 elfutils-0.164-2.el6.x86_64 需要 --> 处理依赖关系 libasm.so.1()(64bit)，它被软件包 elfutils-0.164-2.el6.x86_64 需要 ---> Package gdb.x86_64 0:7.2-92.el6 will be 安装 ---> Package patch.x86_64 0:2.6-6.el6 will be 安装 ---> Package redhat-rpm-config.noarch 0:9.0.3-51.el6.centos will be 安装 ---> Package ruby-libs.x86_64 0:1.8.7.374-5.el6 will be 安装 --> 处理依赖关系 libreadline.so.5()(64bit)，它被软件包 ruby-libs-1.8.7.374-5.el6.x86_64 需要 ---> Package ruby-rdoc.x86_64 0:1.8.7.374-5.el6 will be 安装 --> 处理依赖关系 ruby-irb = 1.8.7.374-5.el6，它被软件包 ruby-rdoc-1.8.7.374-5.el6.x86_64 需要 ---> Package xz.x86_64 0:4.999.9-0.5.beta.20091007git.el6 will be 安装 ---> Package xz-lzma-compat.x86_64 0:4.999.9-0.5.beta.20091007git.el6 will be 安装 --> 执行事务检查 ---> Package compat-readline5.x86_64 0:5.2-17.1.el6 will be 安装 ---> Package elfutils-libs.x86_64 0:0.164-2.el6 will be 安装 ---> Package ruby-irb.x86_64 0:1.8.7.374-5.el6 will be 安装 --> 完成依赖关系计算 依赖关系解决 ============================================================================================================================================================================================================================================================================== 软件包 架构 版本 仓库 大小 ============================================================================================================================================================================================================================================================================== 正在安装: rpm-build x86_64 4.8.0-55.el6 base 131 k ruby x86_64 1.8.7.374-5.el6 base 538 k ruby-devel x86_64 1.8.7.374-5.el6 base 318 k rubygems noarch 1.3.7-5.el6 base 207 k 为依赖而安装: compat-readline5 x86_64 5.2-17.1.el6 base 130 k elfutils x86_64 0.164-2.el6 base 240 k elfutils-libs x86_64 0.164-2.el6 base 230 k gdb x86_64 7.2-92.el6 base 2.3 M patch x86_64 2.6-6.el6 base 90 k redhat-rpm-config noarch 9.0.3-51.el6.centos base 60 k ruby-irb x86_64 1.8.7.374-5.el6 base 318 k ruby-libs x86_64 1.8.7.374-5.el6 base 1.7 M ruby-rdoc x86_64 1.8.7.374-5.el6 base 381 k xz x86_64 4.999.9-0.5.beta.20091007git.el6 base 137 k xz-lzma-compat x86_64 4.999.9-0.5.beta.20091007git.el6 base 16 k 事务概要 ============================================================================================================================================================================================================================================================================== Install 15 Package(s) 总下载量：6.7 M Installed size: 20 M 下载软件包： (1/15): compat-readline5-5.2-17.1.el6.x86_64.rpm | 130 kB 00:00 (2/15): elfutils-0.164-2.el6.x86_64.rpm | 240 kB 00:00 (3/15): elfutils-libs-0.164-2.el6.x86_64.rpm | 230 kB 00:00 (4/15): gdb-7.2-92.el6.x86_64.rpm | 2.3 MB 00:00 (5/15): patch-2.6-6.el6.x86_64.rpm | 90 kB 00:00 (6/15): redhat-rpm-config-9.0.3-51.el6.centos.noarch.rpm | 60 kB 00:00 (7/15): rpm-build-4.8.0-55.el6.x86_64.rpm | 131 kB 00:00 (8/15): ruby-1.8.7.374-5.el6.x86_64.rpm | 538 kB 00:00 (9/15): ruby-devel-1.8.7.374-5.el6.x86_64.rpm | 318 kB 00:00 (10/15): ruby-irb-1.8.7.374-5.el6.x86_64.rpm | 318 kB 00:00 (11/15): ruby-libs-1.8.7.374-5.el6.x86_64.rpm | 1.7 MB 00:00 (12/15): ruby-rdoc-1.8.7.374-5.el6.x86_64.rpm | 381 kB 00:00 (13/15): rubygems-1.3.7-5.el6.noarch.rpm | 207 kB 00:00 (14/15): xz-4.999.9-0.5.beta.20091007git.el6.x86_64.rpm | 137 kB 00:00 (15/15): xz-lzma-compat-4.999.9-0.5.beta.20091007git.el6.x86_64.rpm | 16 kB 00:00 ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ 总计 4.6 MB/s | 6.7 MB 00:01 运行 rpm_check_debug 执行事务测试 事务测试成功 执行事务 正在安装 : xz-4.999.9-0.5.beta.20091007git.el6.x86_64 1/15 正在安装 : xz-lzma-compat-4.999.9-0.5.beta.20091007git.el6.x86_64 2/15 正在安装 : elfutils-libs-0.164-2.el6.x86_64 3/15 正在安装 : elfutils-0.164-2.el6.x86_64 4/15 正在安装 : redhat-rpm-config-9.0.3-51.el6.centos.noarch 5/15 正在安装 : patch-2.6-6.el6.x86_64 6/15 正在安装 : compat-readline5-5.2-17.1.el6.x86_64 7/15 正在安装 : ruby-libs-1.8.7.374-5.el6.x86_64 8/15 正在安装 : ruby-1.8.7.374-5.el6.x86_64 9/15 正在安装 : ruby-irb-1.8.7.374-5.el6.x86_64 10/15 正在安装 : ruby-rdoc-1.8.7.374-5.el6.x86_64 11/15 正在安装 : gdb-7.2-92.el6.x86_64 12/15 正在安装 : rpm-build-4.8.0-55.el6.x86_64 13/15 正在安装 : rubygems-1.3.7-5.el6.noarch 14/15 正在安装 : ruby-devel-1.8.7.374-5.el6.x86_64 15/15 Verifying : gdb-7.2-92.el6.x86_64 1/15 Verifying : compat-readline5-5.2-17.1.el6.x86_64 2/15 Verifying : ruby-rdoc-1.8.7.374-5.el6.x86_64 3/15 Verifying : xz-lzma-compat-4.999.9-0.5.beta.20091007git.el6.x86_64 4/15 Verifying : patch-2.6-6.el6.x86_64 5/15 Verifying : redhat-rpm-config-9.0.3-51.el6.centos.noarch 6/15 Verifying : ruby-irb-1.8.7.374-5.el6.x86_64 7/15 Verifying : ruby-1.8.7.374-5.el6.x86_64 8/15 Verifying : rpm-build-4.8.0-55.el6.x86_64 9/15 Verifying : elfutils-libs-0.164-2.el6.x86_64 10/15 Verifying : rubygems-1.3.7-5.el6.noarch 11/15 Verifying : xz-4.999.9-0.5.beta.20091007git.el6.x86_64 12/15 Verifying : elfutils-0.164-2.el6.x86_64 13/15 Verifying : ruby-devel-1.8.7.374-5.el6.x86_64 14/15 Verifying : ruby-libs-1.8.7.374-5.el6.x86_64 15/15 已安装: rpm-build.x86_64 0:4.8.0-55.el6 ruby.x86_64 0:1.8.7.374-5.el6 ruby-devel.x86_64 0:1.8.7.374-5.el6 rubygems.noarch 0:1.3.7-5.el6 作为依赖被安装: compat-readline5.x86_64 0:5.2-17.1.el6 elfutils.x86_64 0:0.164-2.el6 elfutils-libs.x86_64 0:0.164-2.el6 gdb.x86_64 0:7.2-92.el6 patch.x86_64 0:2.6-6.el6 redhat-rpm-config.noarch 0:9.0.3-51.el6.centos ruby-irb.x86_64 0:1.8.7.374-5.el6 ruby-libs.x86_64 0:1.8.7.374-5.el6 ruby-rdoc.x86_64 0:1.8.7.374-5.el6 xz.x86_64 0:4.999.9-0.5.beta.20091007git.el6 xz-lzma-compat.x86_64 0:4.999.9-0.5.beta.20091007git.el6 完毕！ 2）使用gem这个命令来安装redis接口
[root@itfirst redis_cluster]# gem install redis ERROR: Error installing redis: redis requires Ruby version >= 2.2.2. 这一步骤中出现了bug,度娘告诉我是Ruby版本太低，需要升级版本。
3）升级Ruby的版本
安装rvm，我不知道这是个什么东西，但是感觉像是Ruby的一个包管理器。
[root@itfirst redis_cluster]# curl -L get.rvm.io | bash -s stable % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 24090 100 24090 0 0 10919 0 0:00:02 0:00:02 --:--:-- 91242 Downloading https://github.com/rvm/rvm/archive/1.29.3.tar.gz Downloading https://github.com/rvm/rvm/releases/download/1.29.3/1.29.3.tar.gz.asc gpg: 于 2017年09月11日 星期一 04时59分21秒 CST 创建的签名，使用 RSA，钥匙号 BF04FF17 gpg: 无法检查签名：No public key Warning, RVM 1.26.0 introduces signed releases and automated check of signatures when GPG software found. Assuming you trust Michal Papis import the mpapis public key (downloading the signatures). GPG signature verification failed for '/usr/local/rvm/archives/rvm-1.29.3.tgz' - 'https://github.com/rvm/rvm/releases/download/1.29.3/1.29.3.tar.gz.asc'! Try to install GPG v2 and then fetch the public key: gpg2 --recv-keys 409B6B1796C275462A1703113804BB82D39DC0E3 or if it fails: command curl -sSL https://rvm.io/mpapis.asc | gpg2 --import - the key can be compared with: https://rvm.io/mpapis.asc https://keybase.io/mpapis NOTE: GPG version 2.1.17 have a bug which cause failures during fetching keys from remote server. Please downgrade or upgrade to newer version (if available) or use the second method described above. 这一操作得到了：
gpg2 --recv-keys 409B6B1796C275462A1703113804BB82D39DC0E3
然后利用该密钥下载Ruby并升级。
[root@itfirst redis_cluster]# gpg --keyserver hkp://keys.gnupg.net --recv-keys 409B6B1796C275462A1703113804BB82D39DC0E3 gpg: 下载密钥‘D39DC0E3’，从 hkp 服务器 keys.gnupg.net gpg: /root/.gnupg/trustdb.gpg：建立了信任度数据库 gpg: 密钥 D39DC0E3：公钥“Michal Papis (RVM signing) <mpapis@gmail.com>”已导入 gpg: 没有找到任何绝对信任的密钥 gpg: 合计被处理的数量：1 gpg: 已导入：1 (RSA: 1) [root@itfirst redis_cluster]# curl -sSL https://get.rvm.io | bash -s stable Downloading https://github.com/rvm/rvm/archive/1.29.3.tar.gz Downloading https://github.com/rvm/rvm/releases/download/1.29.3/1.29.3.tar.gz.asc gpg: 于 2017年09月11日 星期一 04时59分21秒 CST 创建的签名，使用 RSA，钥匙号 BF04FF17 gpg: 完好的签名，来自于“Michal Papis (RVM signing) <mpapis@gmail.com>” gpg: 亦即“Michal Papis <michal.papis@toptal.com>” gpg: 亦即“[jpeg image of size 5015]” gpg: 警告：这把密钥未经受信任的签名认证！ gpg: 没有证据表明这个签名属于它所声称的持有者。 主钥指纹： 409B 6B17 96C2 7546 2A17 0311 3804 BB82 D39D C0E3 子钥指纹： 62C9 E5F4 DA30 0D94 AC36 166B E206 C29F BF04 FF17 GPG verified '/usr/local/rvm/archives/rvm-1.29.3.tgz' Creating group 'rvm' Installing RVM to /usr/local/rvm/ Installation of RVM in /usr/local/rvm/ is almost complete: * First you need to add all users that will be using rvm to 'rvm' group, and logout - login again, anyone using rvm will be operating with `umask u=rwx,g=rwx,o=rx`. * To start using RVM you need to run `source /etc/profile.d/rvm.sh` in all your open shell windows, in rare cases you need to reopen all shell windows. 接着，source环境，让rvm可用。
[root@itfirst ~]# source /usr/local/rvm/scripts/rvm查看Ruby可用版本
[root@itfirst ~]# rvm list known # MRI Rubies [ruby-]1.8.6[-p420] [ruby-]1.8.7[-head] # security released on head [ruby-]1.9.1[-p431] [ruby-]1.9.2[-p330] [ruby-]1.9.3[-p551] [ruby-]2.0.0[-p648] [ruby-]2.1[.10] [ruby-]2.2[.7] [ruby-]2.3[.4] [ruby-]2.4[.1] ruby-head # for forks use: rvm install ruby-head-<name> --url https://github.com/github/ruby.git --branch 2.2 # JRuby jruby-1.6[.8] jruby-1.7[.27] jruby[-9.1.13.0] jruby-head # Rubinius rbx-1[.4.3] rbx-2.3[.0] rbx-2.4[.1] rbx-2[.5.8] rbx-3[.84] rbx-head # Opal opal # Minimalistic ruby implementation - ISO 30170:2012 mruby-1.0.0 mruby-1.1.0 mruby-1.2.0 mruby-1[.3.0] mruby[-head] # Ruby Enterprise Edition ree-1.8.6 ree[-1.8.7][-2012.02] # Topaz topaz # MagLev maglev[-head] maglev-1.0.0 # Mac OS X Snow Leopard Or Newer macruby-0.10 macruby-0.11 macruby[-0.12] macruby-nightly macruby-head # IronRuby ironruby[-1.1.3] ironruby-head 可以看到最新的版本是2.4.1，本文安装2.3.0
至此，我们升级了Ruby的版本。
[root@itfirst ~]# rvm install 2.3.0 Searching for binary rubies, this might take some time. Found remote file https://rvm_io.global.ssl.fastly.net/binaries/centos/6/x86_64/ruby-2.3.0.tar.bz2 Checking requirements for centos. Installing requirements for centos. Installing required packages: autoconf, automake, bison, libffi-devel, libtool, readline-devel, sqlite-devel, libyaml-devel.......... Requirements installation successful. ruby-2.3.0 - #configure ruby-2.3.0 - #download % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 21.9M 100 21.9M 0 0 266k 0 0:01:24 0:01:24 --:--:-- 278k No checksum for downloaded archive, recording checksum in user configuration. ruby-2.3.0 - #validate archive ruby-2.3.0 - #extract ruby-2.3.0 - #validate binary ruby-2.3.0 - #setup ruby-2.3.0 - #gemset created /usr/local/rvm/gems/ruby-2.3.0@global ruby-2.3.0 - #importing gemset /usr/local/rvm/gemsets/global.gems.............................. ruby-2.3.0 - #generating global wrappers........ ruby-2.3.0 - #gemset created /usr/local/rvm/gems/ruby-2.3.0 ruby-2.3.0 - #importing gemsetfile /usr/local/rvm/gemsets/default.gems evaluated to empty gem list ruby-2.3.0 - #generating default wrappers........ 4）安装gem redis接口
[root@itfirst ~]# rvm use 2.3.0 Using /usr/local/rvm/gems/ruby-2.3.0 [root@itfirst ~]# rvm remove 1.8.7 ruby-1.8.7-head - #already gone Using /usr/local/rvm/gems/ruby-2.3.0 [root@itfirst ~]# ruby --version ruby 2.3.0p0 (2015-12-25 revision 53290) [x86_64-linux] [root@itfirst ~]# gem install redis Fetching: redis-4.0.1.gem (100%) Successfully installed redis-4.0.1 Parsing documentation for redis-4.0.1 Installing ri documentation for redis-4.0.1 Done installing documentation for redis after 0 seconds 1 gem installed 5）安装rubygems
# yum install -y rubygems Loaded plugins: fastestmirror, security Setting up Install Process Loading mirror speeds from cached hostfile base | 3.7 kB 00:00 didi_jenkins_enable | 1.5 kB 00:00 didi_op_toa_enable | 1.5 kB 00:00 didi_txjenkins_enable | 1.5 kB 00:00 didi_update | 1.5 kB 00:00 epel | 4.3 kB 00:00 extras | 3.4 kB 00:00 tmprepo | 1.5 kB 00:00 updates | 3.4 kB 00:00 Package rubygems-1.3.7-5.el6.noarch already installed and latest version Nothing to do
到目前为止，我们的Ruby和运行redis-trib.rb需要的环境安装完成了。
有了Ruby执行环境，可以开始将之前的6个实例组建成集群了。
redis-trib.rb create --replicas 1 192.168.186.91:7000 192.168.186.91:7001 192.168.186.91:7002 192.168.186.91:7003 192.168.186.91:7004 192.168.186.91:7005有三个master，有三个是slave。 后面跟上6个实例就好了，形式就是ip:port
【此处有坑】
第一坑
[root@itfirst src]# redis-trib.rb create --replicas 1 192.168.186.91:7000 192.168.186.91:7001 192.168.186.91:7002 192.168.186.91:7003 192.168.186.91:7004 192.168.186.91:7005 -bash: redis-trib.rb: command not found [root@itfirst src]# cp redis-trib.rb /usr/local/bin 需要将redis-trib.rb复制到/usr/local/bin目录下。
第二坑
[root@itfirst bin]# redis-trib.rb create --replicas 1 192.168.186.91:7000 192.168.186.91:7001 192.168.186.91:7002 192.168.186.91:7003 192.168.186.91:7004 192.168.186.91:7005 >>> Creating cluster [ERR] Node 192.168.186.91:7000 is not empty. Either the node already knows other nodes (check with CLUSTER NODES) or contains some key in database 0. 踩完第一坑后，继续执行，发现了第二坑，还好有度娘，但是网上各种说法都有（主要参照了《极客on之路》的博客），发现错误的原因是redis数据库没有清除。
[root@itfirst src]# redis-cli -h 192.168.186.91 -p 7001 192.168.186.91:7001> flushdb OK 192.168.186.91:7001> quit [root@itfirst src]# redis-cli -h 192.168.186.91 -p 7002 192.168.186.91:7002> flushdb OK 192.168.186.91:7002> quit [root@itfirst src]# redis-cli -h 192.168.186.91 -p 7003 192.168.186.91:7003> flushdb OK 192.168.186.91:7003> quit [root@itfirst src]# redis-cli -h 192.168.186.91 -p 7004 192.168.186.91:7004> flushdb OK 192.168.186.91:7004> quit [root@itfirst src]# redis-cli -h 192.168.186.91 -p 7005 192.168.186.91:7005> flushdb OK 192.168.186.91:7005> quit [root@itfirst src]# redis-trib.rb create --replicas 1 192.168.186.91:7000 192.168.186.91:7001 192.168.186.91:7002 192.168.186.91:7003 192.168.186.91:7004 192.168.186.91:7005 >>> Creating cluster >>> Performing hash slots allocation on 6 nodes... Using 3 masters: 192.168.186.91:7000 192.168.186.91:7001 192.168.186.91:7002 Adding replica 192.168.186.91:7003 to 192.168.186.91:7000 Adding replica 192.168.186.91:7004 to 192.168.186.91:7001 Adding replica 192.168.186.91:7005 to 192.168.186.91:7002 M: 61b2b608177374fd0382c872f996a2c25f62daac 192.168.186.91:7000 slots:0-5460,9189 (5462 slots) master M: 50e678c98c31baa4ece1cba096cc34b4545456f3 192.168.186.91:7001 slots:5461-10922 (5462 slots) master M: b8dc855a92d1c9a6e358380286a757011c40601d 192.168.186.91:7002 slots:9189,10923-16383 (5462 slots) master S: 42392d8b4665500b3229b5c5b9dcebed311c9cdf 192.168.186.91:7003 replicates 61b2b608177374fd0382c872f996a2c25f62daac S: 4e8cd9bae1dc0ffa63a3b8315e3f92b0490e65f8 192.168.186.91:7004 replicates 50e678c98c31baa4ece1cba096cc34b4545456f3 S: 3344981c3290c39b0d9f427842398c17de835293 192.168.186.91:7005 replicates b8dc855a92d1c9a6e358380286a757011c40601d Can I set the above configuration? (type 'yes' to accept): yes /usr/local/rvm/gems/ruby-2.3.0/gems/redis-4.0.1/lib/redis/client.rb:119:in `call': ERR Slot 9189 is already busy (Redis::CommandError) from /usr/local/rvm/gems/ruby-2.3.0/gems/redis-4.0.1/lib/redis.rb:2764:in `block in method_missing' from /usr/local/rvm/gems/ruby-2.3.0/gems/redis-4.0.1/lib/redis.rb:45:in `block in synchronize' from /usr/local/rvm/rubies/ruby-2.3.0/lib/ruby/2.3.0/monitor.rb:214:in `mon_synchronize' from /usr/local/rvm/gems/ruby-2.3.0/gems/redis-4.0.1/lib/redis.rb:45:in `synchronize' from /usr/local/rvm/gems/ruby-2.3.0/gems/redis-4.0.1/lib/redis.rb:2763:in `method_missing' from /usr/local/bin/redis-trib.rb:212:in `flush_node_config' from /usr/local/bin/redis-trib.rb:776:in `block in flush_nodes_config' from /usr/local/bin/redis-trib.rb:775:in `each' from /usr/local/bin/redis-trib.rb:775:in `flush_nodes_config' from /usr/local/bin/redis-trib.rb:1296:in `create_cluster_cmd' from /usr/local/bin/redis-trib.rb:1696:in `<main>' 第三坑
[root@itfirst src]# redis-trib.rb create --replicas 1 192.168.186.91:7000 192.168.186.91:7001 192.168.186.91:7002 192.168.186.91:7003 192.168.186.91:7004 192.168.186.91:7005 >>> Creating cluster >>> Performing hash slots allocation on 6 nodes... Using 3 masters: 192.168.186.91:7000 192.168.186.91:7001 192.168.186.91:7002 Adding replica 192.168.186.91:7003 to 192.168.186.91:7000 Adding replica 192.168.186.91:7004 to 192.168.186.91:7001 Adding replica 192.168.186.91:7005 to 192.168.186.91:7002 M: 61b2b608177374fd0382c872f996a2c25f62daac 192.168.186.91:7000 slots:0-5460,9189 (5462 slots) master M: 50e678c98c31baa4ece1cba096cc34b4545456f3 192.168.186.91:7001 slots:5461-10922 (5462 slots) master M: b8dc855a92d1c9a6e358380286a757011c40601d 192.168.186.91:7002 slots:9189,10923-16383 (5462 slots) master S: 42392d8b4665500b3229b5c5b9dcebed311c9cdf 192.168.186.91:7003 replicates 61b2b608177374fd0382c872f996a2c25f62daac S: 4e8cd9bae1dc0ffa63a3b8315e3f92b0490e65f8 192.168.186.91:7004 replicates 50e678c98c31baa4ece1cba096cc34b4545456f3 S: 3344981c3290c39b0d9f427842398c17de835293 192.168.186.91:7005 replicates b8dc855a92d1c9a6e358380286a757011c40601d Can I set the above configuration? (type 'yes' to accept): yes /usr/local/rvm/gems/ruby-2.3.0/gems/redis-4.0.1/lib/redis/client.rb:119:in `call': ERR Slot 9189 is already busy (Redis::CommandError) from /usr/local/rvm/gems/ruby-2.3.0/gems/redis-4.0.1/lib/redis.rb:2764:in `block in method_missing' from /usr/local/rvm/gems/ruby-2.3.0/gems/redis-4.0.1/lib/redis.rb:45:in `block in synchronize' from /usr/local/rvm/rubies/ruby-2.3.0/lib/ruby/2.3.0/monitor.rb:214:in `mon_synchronize' from /usr/local/rvm/gems/ruby-2.3.0/gems/redis-4.0.1/lib/redis.rb:45:in `synchronize' from /usr/local/rvm/gems/ruby-2.3.0/gems/redis-4.0.1/lib/redis.rb:2763:in `method_missing' from /usr/local/bin/redis-trib.rb:212:in `flush_node_config' from /usr/local/bin/redis-trib.rb:776:in `block in flush_nodes_config' from /usr/local/bin/redis-trib.rb:775:in `each' from /usr/local/bin/redis-trib.rb:775:in `flush_nodes_config' from /usr/local/bin/redis-trib.rb:1296:in `create_cluster_cmd' from /usr/local/bin/redis-trib.rb:1696:in `<main>' 还是度娘靠谱，在《redis 跨机器集群启动出错》博客中找到了答案。
这是由于之间创建集群没有成功,需要将nodes.conf和dir里面的文件全部删除。
[root@itfirst 7000]# find / -name "nodes-7000.conf" /usr/local/redis-3.2.3/src/nodes-7000.conf [root@itfirst 7000]# cd ../../ [root@itfirst src]# ls adlist.c bitops.o dict.h lzf_c.o notify.c redis-benchmark.c rio.c slowlog.h t_zset.o adlist.h blocked.c dict.o lzf_d.c notify.o redis-benchmark.o rio.h slowlog.o util.c adlist.o blocked.o dump.rdb lzf_d.o object.c redis-check-aof rio.o solarisfixes.h util.h ae.c cluster.c endianconv.c lzf.h object.o redis-check-aof.c scripting.c sort.c util.o ae_epoll.c cluster.h endianconv.h lzfP.h pqsort.c redis-check-aof.o scripting.o sort.o valgrind.sup ae_evport.c cluster.o endianconv.o Makefile pqsort.h redis-check-rdb sdsalloc.h sparkline.c version.h ae.h config.c fmacros.h Makefile.dep pqsort.o redis-check-rdb.c sds.c sparkline.h ziplist.c ae_kqueue.c config.h geo.c memtest.c pubsub.c redis-check-rdb.o sds.h sparkline.o ziplist.h ae.o config.o geo.h memtest.o pubsub.o redis-cli sds.o syncio.c ziplist.o ae_select.c crc16.c geo.o mkreleasehdr.sh quicklist.c redis-cli.c sentinel.c syncio.o zipmap.c anet.c crc16.o help.h multi.c quicklist.h redis-cli.o sentinel.o testhelp.h zipmap.h anet.h crc64.c hyperloglog.c multi.o quicklist.o redis_cluster server.c t_hash.c zipmap.o anet.o crc64.h hyperloglog.o networking.c rand.c redis-sentinel server.h t_hash.o zmalloc.c aof.c crc64.o intset.c networking.o rand.h redis-server server.o t_list.c zmalloc.h aof.o db.c intset.h nodes-7000.conf rand.o redis-trib.rb setproctitle.c t_list.o zmalloc.o asciilogo.h db.o intset.o nodes-7001.conf rdb.c release.c setproctitle.o t_set.c bio.c debug.c latency.c nodes-7002.conf rdb.h release.h sha1.c t_set.o bio.h debugmacro.h latency.h nodes-7003.conf rdb.o release.o sha1.h t_string.c bio.o debug.o latency.o nodes-7004.conf redisassert.h replication.c sha1.o t_string.o bitops.c dict.c lzf_c.c nodes-7005.conf redis-benchmark replication.o slowlog.c t_zset.c [root@itfirst src]# rm -rf nodes-700* 然后重启redis服务。
[root@itfirst src]# redis-trib.rb create --replicas 1 192.168.186.91:7000 192.168.186.91:7001 192.168.186.91:7002 192.168.186.91:7003 192.168.186.91:7004 192.168.186.91:7005 >>> Creating cluster >>> Performing hash slots allocation on 6 nodes... Using 3 masters: 192.168.186.91:7000 192.168.186.91:7001 192.168.186.91:7002 Adding replica 192.168.186.91:7003 to 192.168.186.91:7000 Adding replica 192.168.186.91:7004 to 192.168.186.91:7001 Adding replica 192.168.186.91:7005 to 192.168.186.91:7002 M: 319da27d8668a15d2d2d02afe433247694343459 192.168.186.91:7000 slots:0-5460 (5461 slots) master M: 3da756265e301ac0210760f13e990473f87a3017 192.168.186.91:7001 slots:5461-10922 (5462 slots) master M: 6f336da48c892d8e0c541a864765978ebfbca6d5 192.168.186.91:7002 slots:10923-16383 (5461 slots) master S: ff4cf9d8a141d85c478b9af0358c93bca342c236 192.168.186.91:7003 replicates 319da27d8668a15d2d2d02afe433247694343459 S: 43c2e0d7799e84b449803a68d557c3431e9e047e 192.168.186.91:7004 replicates 3da756265e301ac0210760f13e990473f87a3017 S: 3f174fae106cb6cf7e7f21ed844895ed7c18f793 192.168.186.91:7005 replicates 6f336da48c892d8e0c541a864765978ebfbca6d5 Can I set the above configuration? (type 'yes' to accept): yes >>> Nodes configuration updated >>> Assign a different config epoch to each node >>> Sending CLUSTER MEET messages to join the cluster Waiting for the cluster to join.... >>> Performing Cluster Check (using node 192.168.186.91:7000) M: 319da27d8668a15d2d2d02afe433247694343459 192.168.186.91:7000 slots:0-5460 (5461 slots) master M: 3da756265e301ac0210760f13e990473f87a3017 192.168.186.91:7001 slots:5461-10922 (5462 slots) master M: 6f336da48c892d8e0c541a864765978ebfbca6d5 192.168.186.91:7002 slots:10923-16383 (5461 slots) master M: ff4cf9d8a141d85c478b9af0358c93bca342c236 192.168.186.91:7003 slots: (0 slots) master replicates 319da27d8668a15d2d2d02afe433247694343459 M: 43c2e0d7799e84b449803a68d557c3431e9e047e 192.168.186.91:7004 slots: (0 slots) master replicates 3da756265e301ac0210760f13e990473f87a3017 M: 3f174fae106cb6cf7e7f21ed844895ed7c18f793 192.168.186.91:7005 slots: (0 slots) master replicates 6f336da48c892d8e0c541a864765978ebfbca6d5 [OK] All nodes agree about slots configuration. >>> Check for open slots... >>> Check slots coverage... [OK] All 16384 slots covered. 登录集群客户端，-c标识以集群方式登录
[root@itfirst src]# redis-cli -h 192.168.186.91 -c -p 7002查看集群状态
192.168.186.91:7002> cluster info cluster_state:ok cluster_slots_assigned:16384 cluster_slots_ok:16384 cluster_slots_pfail:0 cluster_slots_fail:0 cluster_known_nodes:6 cluster_size:3 cluster_current_epoch:6 cluster_my_epoch:3 cluster_stats_messages_sent:124174 cluster_stats_messages_received:124174 192.168.186.91:7002> cluster nodes 319da27d8668a15d2d2d02afe433247694343459 192.168.186.91:7000 master - 0 1519465974307 1 connected 0-5460 3f174fae106cb6cf7e7f21ed844895ed7c18f793 192.168.186.91:7005 slave 6f336da48c892d8e0c541a864765978ebfbca6d5 0 1519465971278 6 connected 6f336da48c892d8e0c541a864765978ebfbca6d5 192.168.186.91:7002 myself,master - 0 0 3 connected 10923-16383 3da756265e301ac0210760f13e990473f87a3017 192.168.186.91:7001 master - 0 1519465972288 2 connected 5461-10922 43c2e0d7799e84b449803a68d557c3431e9e047e 192.168.186.91:7004 slave 3da756265e301ac0210760f13e990473f87a3017 0 1519465973298 5 connected ff4cf9d8a141d85c478b9af0358c93bca342c236 192.168.186.91:7003 slave 319da27d8668a15d2d2d02afe433247694343459 0 1519465969258 4 connected 
本文发表于2018年02月24日 10:31
(c)注：本文转载自https://my.oschina.net/gaoenwei/blog/1623214，转载目的在于传递更多信息，并不代表本网赞同其观点和对其真实性负责。如有侵权行为，请联系我们，我们会及时删除.
阅读 1740 讨论 0 喜欢 0
基于vue-element-admin框架改造——支持第三方iframe网站
Ceph 十年演进的经验教训 —— 磁盘文件系统并不适合作为分布式存储后端
避坑！MotionGo就是一款诈骗软件！千万不要用ChatPPT，浪费时间！
宝塔面板使用WWW用户执行计划任务命令 解决laravel日志权限问题 宝塔设置计划任务执行用户
手机微信一键制作透明底文字表情 教你如何让微信表情包背景为透明 自制微信表情包动图 文字表情在线制作
ssh目录权限配置指南 .ssh文件夹及rsa_id.pub等文件正确权限规则
Mac连接亚马逊AWS EC2 远程连接登录不上去 有pem私钥文件依然要输密码 默认密码 教程
PHP工程师必知必会 - Linux系统常用命令 - Linux中的网络管理命令（下）
| 抢先体验 |
|---|
扫码体验 |
| 闪念胶囊 |
|---|
|
你要过得好哇，这样我才能恨你啊，你要是过得不好，我都不知道该恨你还是拥抱你啊。 17:21 2021年04月19日 查看详情 |
|
直抵黄龙府，与诸君痛饮尔。 18:17 2021年03月28日 查看详情 |
|
那时陪伴我的人啊，你们如今在何方。 16:28 2021年03月19日 查看详情 |
|
不出意外的话，我们再也不会见了，祝你前程似锦。 18:05 2021年03月17日 查看详情 |
|
这世界真好，吃野东西也要留出这条命来看看 21:21 2021年03月14日 查看详情 |
| Contact |
|---|
Y2lvbkBjaGluYWNpb24uY24= |